The maintenance methods of LED display are mainly divided into front maintenance and rear maintenance. Post-maintenance is a large number of large-scale LED displays applied to the exterior walls of buildings. Maintenance channels must be designed to facilitate maintenance personnel to perform maintenance and repairs from the back of the screen. The overall technical requirements are high, the installation and disassembly are cumbersome, and it is time-consuming and labor-intensive. However, this is obviously not a more suitable choice for indoor compact applications or inlaid or wall-mounted installations where the space is large and small.
led display
With the rise of small-pitch LEDs, indoor LED display products that have been maintained before gradually dominate the market. It means that the magnetic element and the LED display box are fixed by magnetic adsorption. During operation, the suction cup directly touches the surface of the box for front maintenance, so that the module structure of the LED screen is removed from the box to realize the front maintenance screen. body. This front maintenance method can make the overall structure of the display screen thinner and lighter, blending with the surrounding building environment, and highlighting the ability of indoor visual expression.
led display
Compared with post-maintenance, the advantages of front-maintenance LED screens are mainly to save space, achieve greater utilization of environmental space, and reduce the difficulty of post-maintenance work. The front maintenance mode does not need to reserve maintenance channels, supports independent front maintenance, and saves maintenance space on the back of the display. It does not need to disassemble the wire, supports quick maintenance work, and disassembly is simpler and more convenient. The module structure that requires the removal of screws is required for front maintenance and later maintenance. In the case of a single point of failure, only a single person is required to disassemble and maintain a single LED or pixel, which has high maintenance efficiency and low cost. However, due to the high-density characteristics of the room, the structure of this type of indoor product has higher requirements for heat dissipation of the cabinet, otherwise the display screen is prone to local failures.
Relatively speaking, post-maintenance is not undesirable. Its price is slightly lower, suitable for installation scenarios such as roof type and column type, and its inspection and maintenance efficiency is high. Due to different application scenarios, you can choose these two maintenance methods according to actual needs.
