a. Too many desktop files: Some friends who don't know about industrial tablets often put files and downloaded software on the desktop of industrial tablets. But I don't know that the files on the desktop are also saved in the system disk, which later caused the system disk to crash.
Solution: Desktop files should be categorized and archived and saved to other drive letters, which can relieve system disk space on the one hand, and it's also convenient to find files by yourself.
B. Insufficient capacity of the system disk: I often see that the system disk of an industrial tablet computer is less than 10G, and I often call myself that the industrial tablet computer often crashes. In this case, the crash is inevitable. You must know that the system disk is the space where the entire industrial computer system and software must run. When there is not enough space for the program to run, of course it will crash. We have to organize the system disk frequently and put the files on other disks. There is also a non-system disk when the software is usually installed.
There are too many programs running. The more programs the industrial tablet computer runs, the higher the memory of the industrial tablet computer will be occupied. When most of the memory is used, it will often crash. This cannot be avoided. It is also a common phenomenon of crashes.
Solution: reduce the running program or increase the running memory.
C. Self-relationship: We all know that the speed of industrial flat panel operation has a lot to do with the configuration of the industrial computer itself. The better the configuration, the faster the operation speed. The worse the configuration, the slower the operation will be. When we run the software, the industrial panel computer configuration can't keep up, and it will naturally crash.
Solution: buy a high-profile industrial panel computer.
Common problems of industrial tablet PCs: screen failure, processing steps:
1. It is a system failure: the industrial panel computer system failure generally restarts or replaces the system. In many cases, the hardware device under Windows system cannot be recognized because it is not properly powered on. This situation is mostly a temporary problem during the operation of the device. When we completely shut down and cut off the power, restart the system and the device. The fault will generally be resolved. Therefore, when we encounter this situation, we can first use this simple method to solve the failure of the flat touch screen. Long press the tablet power button to completely turn off the tablet system power, and then restart the tablet Windows system.
2. Resume the reset, if invalid, then flash the BIOS. If the settings are invalid through the above methods, the problem can only be solved by system restoration, recovery or resetting the tablet, and even the BIOS needs to be refreshed.
3. Hardware failure: Hardware failure is generally caused by poor contact of the touch screen, which is related to the loosening of the cable interface. You can open the back cover yourself, and you can check whether there is any problem with the cable between the motherboard and the screen. If the hands-on ability is not strong, you can find a repair point for help.
Fourth, an external mouse and keyboard can also cause conflicts. During the use of the tablet, if a wireless keyboard and mouse is connected, the touch screen function may be lost due to conflicts in the default input device settings. At this time, it can be solved by uninstalling the wireless device first, and then letting the system recognize it again. Use a wired keyboard and mouse to enter the system, in Device Manager → click Human Input Devices → right-click the Goodix Touch HID item → Uninstall → in the opened Confirm Device Uninstallation dialog box, cancel the Delete Check the item of this device's driver software→OK.
5. The weather is too cold: the operating temperature of the screen is generally above zero. Of course, this is a theoretical value, and it may actually be higher. When the day is cold, the screen does not reach the working temperature, it will naturally be intuitively reflected in the touch failure.
